Alltest Instruments Logo - Red Signal Waves

Electrical & Environmental
Testing Services

Don’t take shortcuts along the way to inventing and innovating new products and technologies at the risk of sacrificing reliability and security. Make sure your equipment is tested to industry standards.

Our team of experts and trusted service partners offer high quality, low cost, turnkey solutions for defense, telecom, engineering, healthcare, manufacturing, and more:

  • Electromagnetic Compatibility/Interference (EMC/EMI) Testing Standards
  • Environmental Testing Standards
  • Mechanical Testing Standards
  • MIL STD 461
  • MIL STD 810
  • DO-160
  • CISPR 25
  • CISPR 32

Environmental/Mechanical Test Services

Test (to MIL STD)Est. Price Per Test (USD)Est. Time Per Test (Hrs)
Test Equipment Setup: includes the setup of all thermocouples, accelerometers and data acquisition equipment needed to monitor tests.$2,6258
High Temperature: as per MIL-STD-810H, Method 501.7, Procedure II.$1,6888
Low Temperature: as per MIL-STD-810H, Method 502.7, Procedure II.$1,5008
Humidity: as per MIL-STD-810H, Method 507.6, Procedure II.$4,812168
Pressure: as per MIL-STD-810H, Method 500.7, Procedure II, Operating.$6,0628
Vibration: as per MIL-STD-167-1A, Operating vibration. Perform Exploratory, Variable Frequency and Endurance vibration proles in each of the 3 axes.$9,00024
Shock: as per MIL-DTL-901E, Medium weight shock requirements.$17,37532
Noise: as per MIL-STD-1474, Requirement 5.$17,37524
Rain: as per MIL-STD-810H, Method 506.6, Procedure I, Blowing Rain.$4,3258
Icing: as per MIL-STD-810H, Method 521.4.$4,43812
Snow: as per MIL-STD-810H, Method 521.4.$4,93812
Hail: as per ASTM F320, Hail Strike.$4,31212
Salt Fog: as per MIL-STD-810H, method 509.7. Two cycles, 24 hours wet, 24 hours dry per cycle (96 hours total test time).$2,25096
Sand: as per MIL-STD-810H, Method 510.7, Procedure II.$9,43816
Dust: as per MIL-STD-810H, Method 510.7, Procedure I.$13,12530
Formal Test Report: Including photos, plots, and calibration data as applicable.$2,625 

EMC/EMI Test Services (available Q2 2021)

Test (to MIL STD)Est. Price Per Test (USD)
CE101 (Conducted Emissions, Power Leads, 30 Hz to 10 kHz) – 2 Modes$2,438
CE102 (Conducted Emissions, Power Leads, 10 kHz to 10 MHz) – 1 Mode$2,438
CE106 Antenna Terminals, 10 KHz to 40 GHz$2,438
CS101 (Conducted Susceptibility, Power Leads, 30 Hz to 150 kHz) – 2 modes$4,812
CS109 Structure Current Spike, 60 Hz to 100 KHz$7,250
CS114 (Conducted Susceptibility, Bulk Cable Injection, 10 kHz to 200 MHz) – 2 modes$7,250
CS115 Bulk Cable Injection, Inputs Excitation$7,250
CS116 (Conducted Susceptibility, Damped Sinusoidal Transients, 10 kHz to 100 MHz) – 2 Modes$4,812
CS117 Lightning Induced Transients$7,250
CS118 Personnel Borne Electrostatic Discharge$7,250
RE102 (Radiated Emissions, Electric Field, 10 kHz to 18 GHz) – 1 mode$9,688
RE103 Antenna Spurious and Harmonic Outputs, 10 KHz to 40 GHz$4,812
RS103 (Radiated Susceptibility, Electric Field, 2 MHz to 18GHz) – 2 modes$14,375
RS105 Electromagnetic Pulse$14,375

Request a Quote for Testing Services